*New: DET: New control module for Softa ELSD detectors - available for testing
*New: LC Control: New control modules for Young-Lin 9100 HPLC (developed by Young-LIN)
*New: GC Control: New control modules for Young Lin 6100 GC (developed by Young Lin)
*New: GC Control: New control module for CSI series 300 Fast GC is available for testing. Code for unlocking the communication in GC has to be obtained from CSI.
*New: LC Control: manual changes to auxiliary pumps (start/stop, flow, ...) are automatically logged.
*New: AS Control: Spark Midas - in the MIX table it is possible to define destination vial relative to the sample
*New: LC Control: The Knauer module drivers were updated to version 2.6.4.1074
*New: LC Control: Thermo Rheos Series Pump driver was updated to version
1.01.0000
#Fixed Bug: LC Control: For proper communication with Shimadzu controllers, the file cbmocx.ini was moved to the Windows installation directory. For existing Shimadzu LC-10/20 system Clarity installations it is necessary to change the communication settings on the controller (Enhanced for SCL-10Avp, ClassVP for CBM-20A and CBM-20Alite)
#Fixed Bug: LC Control: Shimadzu LC-10/20 system - RF-10Axl problems with the wavelength settings in the time program
#Fixed Bug: GC Control: Agilent 68xx - the validity of column parameters is now checked in the Method Setup dialog
#Fixed Bug: GC Control: 68xx GC - a bug in communication, causing occasional communication errors
#Fixed Bug: Audit trail - word wrap implemented for printing
#Fixed Bug: LC Control: The Range for SPD-M10Avp detector signals was increased to 5000 mAU
#Fixed Bug: AS Control: HTA 200HT sampler - the Electro Valve Flush Time [min] in Clarity Setup Method was displayed 10x lower then it was set in the sampler (i.e. for 1 min set the real time was 10 min)
#Fixed Bug: Fixed bug in User columns calculations
#Fixed Bug: Result Table user columns - the Efficiency/length column was displayed incorrectly
*New: LC Control: New control modules for Young-Lin 9100 HPLC (developed by Young-LIN)
*New: GC Control: New control modules for Young Lin 6100 GC (developed by Young Lin)
*New: GC Control: New control module for CSI series 300 Fast GC is available for testing. Code for unlocking the communication in GC has to be obtained from CSI.
*New: LC Control: manual changes to auxiliary pumps (start/stop, flow, ...) are automatically logged.
*New: AS Control: Spark Midas - in the MIX table it is possible to define destination vial relative to the sample
*New: LC Control: The Knauer module drivers were updated to version 2.6.4.1074
*New: LC Control: Thermo Rheos Series Pump driver was updated to version
1.01.0000
#Fixed Bug: LC Control: For proper communication with Shimadzu controllers, the file cbmocx.ini was moved to the Windows installation directory. For existing Shimadzu LC-10/20 system Clarity installations it is necessary to change the communication settings on the controller (Enhanced for SCL-10Avp, ClassVP for CBM-20A and CBM-20Alite)
#Fixed Bug: LC Control: Shimadzu LC-10/20 system - RF-10Axl problems with the wavelength settings in the time program
#Fixed Bug: GC Control: Agilent 68xx - the validity of column parameters is now checked in the Method Setup dialog
#Fixed Bug: GC Control: 68xx GC - a bug in communication, causing occasional communication errors
#Fixed Bug: Audit trail - word wrap implemented for printing
#Fixed Bug: LC Control: The Range for SPD-M10Avp detector signals was increased to 5000 mAU
#Fixed Bug: AS Control: HTA 200HT sampler - the Electro Valve Flush Time [min] in Clarity Setup Method was displayed 10x lower then it was set in the sampler (i.e. for 1 min set the real time was 10 min)
#Fixed Bug: Fixed bug in User columns calculations
#Fixed Bug: Result Table user columns - the Efficiency/length column was displayed incorrectly
Product Line
Product Version
2.6