*New: The Windows 2000 are no longer supported in Clarity version 4.0 and higher. Older versions are still available for downloads.
*New: Command Chromatogram - Baseline - Allow Crossing enables the intersection of the signal with the baseline.
*New: Hardware: new external A/D Converter Colibrick.
*New: Data Acquisition window: View menu - includes the Set Axes Ranges command for setting the ranges for detector and auxiliary signals.
*New: Integration - New filters Moving Average and Savicky-Golay. Value n corresponds to the number of points used by (2n+1).
*New: The Spike Removal command will replace spike (peak) in selected interval by estimated baseline curve. The Spike Filter command, will remove narrow (electronic) spikes, parameter range is 1-100 corresponding to number of points processed.
*New: Data Acquisition window: improved auto scaling of the signal outside acquisition.
*New: Sequence - when relative path is used in chromatogram file name, corresponding subdirectory will be created in the corresponding project subfolder.
*New: Report setup, Chromatogram, Print range new command Preview and Detail will print the entire chromatogram and selected detail as two graphs (sharing the same settings).
*New: Chromatogram window new option Perform Postrun to perform postrun actions (prints and exports) by single click.
*New: Graph Properties - Signals dialog: the Grey Out Inactive Signals command applies to inactive signals in Overlay mode.
*New: Option to prolong/renew expired Trial mode in RkNDUSB HW keys.
*New: Chromatogram export to AIA - header now includes detector (signal) name.
*New: Integration - Interval operations are performed on peaks with apex within the set interval (Previously entire peak had to be included).
*New: Minor improvements of User Interface.
*New: Option
*New: Hardware: Updated drivers for U-PAD2, Colibrick.
*New: Clarity registration form - could be printed and sent by fax if internet connection is not available.
*New: Improved formatting of the Note field in reports.
*New: Print Icon on toolbars now prints directly, without offering the printer selection dialog. Not implemented in Audit Trail Window.
*New: User Options dialog: "Warn before running already measured sequence" is now active in default desktop.
*New: The Filter command (Chromatogram Window, Edit menu), intended to hide redundant lines in integration table has been discontinued.
*New: Method Setup - Event table: new event Ready triggered when all hardware on instrument reports ready.
*New: The Perform Postrun window now includes the Sign button for signing the performed operations.
*New: Calibration - new peak names are created with three decimals instead of 2, that means "Peak 14.935" instead "Peak 14.93". To avoid conflicts in high speed analyses.
*New: Tables - right click on row/column header will select the corresponding row. Right click on upper-left corner cell will select entire table.
#Fixed Bug: The format of calibration file has been optimized. It decreased its size and sped up its processing. The new *.cal files are not compatible with previous Clarity versions.
#Fixed Bug: Data Acquisition window: Updating of signals during run.
#Fixed Bug: Chromatogram, Properties, Signals - improved options for scaling. Settings for Maximum and Minimum are now independent to better cope with negative peaks.
#Fixed Bug: Import CDF - improved detection of data range.
#Fixed Bug: Calibration, The "Calculate by" column in the Global Calibration Table is not functional for lines marked as Group in the Peak Type column.
#Fixed Bug: Data Acquisition window - problem with the "Minus" key on numeric Keypad in the signal/time edit box.
#Fixed Bug: Chromatogram window - improved behavior of the Open Chromatogram Sequentially browse buttons.
#Fixed Bug: The validation of No of points field in the Calibration Options dialog did not work properly.
#Fixed Bug: Changes in the chromatogram opened in Chromatogram and Calibration windows were lost when the Instrument window was closed directly.
#Fixed Bug: AIA export - attribute Retention_units was changed from Minutes to Seconds.
#Fixed Bug: Updated dpinst.exe to solve some problems with driver installations.
#Fixed Bug: The graph signal properties were not stored in the Graph Properties.
#Fixed Bug: Data Acquisition window - delayed drawing of signals.
#Fixed Bug: Chromatogram: very low value of threshold was displayed as zero value.
#Fixed Bug: Chromatogram: The Column Performance Table did not detect the situation, when there were no peaks in the chromatogram.
#Fixed Bug: Chromatogram: The rotated text labels in graph persisted in display after they were deleted.
#Fixed Bug: Export Data dialog: certain settings were not stored properly.
#Fixed Bug: Corrupted unload splash screen appeared when the Clarity main window was partly off the monitor.
#Fixed Bug: Chromatogram measured with fraction collector incorrectly indicated to be modified after each opening.
#Fixed Bug: Exporting data in Postrun occasionally switched signals.
#Fixed Bug: Data Acquisition window: it was not possible to modify the axes ranges after Abort of the analysis.
#Fixed Bug: The Message boxes were larger than necessary.
#Fixed Bug: Sequence window: editing a row from which consecutively the analysis started caused that the cursor freezed up in the table.
#Fixed Bug: Chromatogram: checking the "Use User Options" while having the graph zoomed caused incorrect behavior of the graph.
4.0.0
Product Line
Product Version
4.0