5.0.2

*New: Control: Spark ACE and HPD control modules are now part of the Symbiosys control module.
*New: Audit Trail: Some errors were not correctly recorded in Daily Audit Trail.
*New: Calibration:  the  "Is ISTD" and "Use ISTD from" list-boxes are now available also on the Compound tab.
*New: Clarity now supports 32 signals in chromatogram.
*New: Command line parameters: new parameter "printPDF".
*New: Control: Antec Decade Elite detector control module is now available for testing.
*New: Control: CTC-PAL - improved behavior in Headspace mode:  number of locked rows in sequence limited to six, error message when the sampler aborts performing sequence. Checkbox Overlap Samples renamed to Headspace.
*New: Control: Dani Master DHS driver updated to version 1.0.5.0.
*New: Control: Flom pumps (301M, AI-12 Series) control by UNI RUBY has been released.
*New: Control: HTA - HT 2X00H autosampler control module has been released.
*New: Control: Chromophor ChromoPeak 2010 pump control by Ruby script is now available for testing.
*New: Control: Knauer Pump P6.1L, Detector PLATINblue PDA-1, Detektor CM2.1S, Thermostat T-1, IFU 2.1 Interface box, UVD2.1L new control modules have been released.
*New: Control: Kontron AS460/465 autosampler control module is now available for testing.
*New: Control: LabAlliance/SSI pumps by Uni-Ruby (now including also Prep 300, UHP, VersaGrad UHP, HF 300) have been released.
*New: Control: New Sykam control modules S1125/S1130/S1132 HPLC pump, S5250/S5300 AS, S3245/S3250 UV-VIS detector have been released.
*New: Control: Schambeck control modules S 9425 HPLC Pump, S 6250 AS, S 4245 UV-VIS detector have been released.
*New: Control: Rheodyne LabPro Valve Actuator by Uni-Ruby module has been released.
*New: Control: Rigol L-3000 HPLC control module updated to version 1.0.0.27.
*New: Control: Rigol L-3320 AS updated to version 1.0.0.18.
*New: Control: Sedere - Sedex LC detector control module has been released.
*New: Control: Spark Symbiosis system control module is now available for testing.
*New: Control: UNI-RUBY - new items Maximum Pressure Limit and Maximum Flow in Configuration, Setup of for selected models.
*New: Control: Waters Fraction Collector II by UNI Ruby has been released.
*New: Device Monitor: new command Reorder Monitors... in the View menu to change the order of the individual panes.
*New: Extension MS: New instrument type GC-MS-TOF (requires corresponding extension).
#Fixed Bug: Calibration: Multiple ISTD - compound assignment to ISTD2-5 was not saved in calibration. Fixed in 5.0.1.461
#Fixed Bug: Control: Agilent 7890 possible crashes.
#Fixed Bug: Control: Agilent 7890, method setup, Gas sampling valve, Load and Injection times were labelled as seconds instead of minutes.
#Fixed Bug: Control: CTC PAL autosampler - updated HS-Inj.cyx to perform heating od heater and syringe simultaneously.
#Fixed Bug: Control: Fraction Collector by Valve (VICI, Rheodyne) - on shutdown has go to Waste position.
#Fixed Bug: Control: HT2x00H autosampler sending Injection Synchro parameters from method.
#Fixed Bug: Control: HTA HT3x00A autosampler setting for Injection synchro from method was not functional.
#Fixed Bug: Extension CE: the CE-PDA instrument, crash during Perform postrun (introduced in 5.0.1).
#Fixed Bug: Extension PDA: possible crash during 3D data import in PDA window.
#Fixed Bug: Chromatogram window, toolbars were reset to default at each window opening. (introduced in 5.0.0.)
#Fixed Bug: In start-restart mode the autostop time was not reset at restart and the next acquisition ended prematurely. Affected only some detectors. Fixed in 5.0.1.461.
#Fixed Bug: Installation:  in some cases Clarity required prematurely computer restart.
#Fixed Bug: Installation: during Clarity drivers uninstall, unrelated drivers installed by DpInst installer were incorrectly removed.
#Fixed Bug: Installation: the Clarity group in Start menu was not removed after uninstallation of Clarity.
#Fixed Bug: Possible crash when closing Chromatogram and Calibration windows.
#Fixed Bug: Print to PDF - some items (signals, labels) were not printed correctly.
#Fixed Bug: Sequence import - modified file open dialog.