*New: Control: Released - Advion Avant HPLC and UHPLC system control module has been released.
*New: Control: Released - ECOM Toy detector control module has been released.
*New: Control: Testing - Runge Mikron 31 control module is available for testing.
*New: Control: Testing - Runge Mikron 81 control module is available for testing.
*New: Control: Testing - Separlab Separflow FC fraction collector control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen AS control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen Column Oven control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen GC/MS control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen PDA detector control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen Pump control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen RID control module is available for testing.
*New: Control: Testing - Young In Chromass YCChroZen UVD control module is available for testing.
*New: Control: Updated drivers - Agilent ICF libraries have been updated to version A.03.00.U1. The IQ is now performed using the new SVT Tool.
*New: Control: Updated drivers - Apix ChromPix2 driver updated to version 2.5.0.512.
*New: Control: Updated drivers - CTC - PAL3 RC.NET driver for ICF updated to version 1.6.0.1.
*New: Control: Updated drivers - ECOM ECP2000 driver has been updated to version 3.7.0.0.
*New: Control: Updated drivers - PerkinElmer NexION driver has been updated to version 1.2.0.90 and now supports also NexION 300, 350 and 5000 models.
*New: Control: Updated drivers - Sykam S1130 driver has been updated to version 2.0.1.17.
*New: Control: Updated drivers - Sykam S150 driver has been updated to version 2.1.0.7.
*New: Control: Updated drivers - Sykam S4120 driver has been updated to version 1.0.8.0.
*New: Control: Updated drivers - Sykam S5300 driver has been updated to version 2.0.0.17.
*New: Control: Updated drivers - Young In Chromass YCChroZenGC driver has been updated to version 1.0.1.19.
*New: Control: Updated drivers - Young In Chromass YL6500 GC driver has been updated to version 1.0.1.14.
*New: Control: Updated drivers - Young In Chromass YL9110 driver has been updated to version 4.0.4.17.
*New: Control: Updated drivers - Young In Chromass YL9130 driver has been updated to version 4.0.2.16.
*New: Control: Updated drivers - Young In Chromass YL9150 Plus driver has been updated to version 1.0.1.11.
*New: Control: Updated drivers - Young In Chromass YL9160 PDA driver has been updated to version 4.0.1.4.
*New: Control: Agilent ICF - New button Configuration in Device monitor to amend existing configuration (for example trays etc.).
*New: Control: Agilent ICF 3.0 no more requires the .NET framework 3.5 for installation.
*New: Control: CTC - PAL3 now supports activation of the GC Prep Run by a digital output. (new scripts have been added).
*New: Control: Spark Mistral now has support for LAN communication, has diverter valve and it is possible to send method with thermostat Off.
*New: Control: Teledyne Foxy-200 now supports firmware 2135-063 (CombiFlash).
*New: Command line parameters: New option for parameter Enable_asserts =2 (create a dump, but do not offer to send it).
*New: Chromatogram: Import AIA File - Some options now can be added or amended before import (e.g., detector and Retention units, detector maximum and minimum value,..).
*New: Chromatogram: Mathematical operations now do not require Overlay mode set On manually.
*New: Chromatogram: When opening chromatogram with linked calibration outside of current project, it is opened with stored or no calibration to assure correct results.
*New: Instrument window: The window is now resizable, and if resized horizontally, Instrument image (same as in the main window) will be displayed.
*New: Single Analysis: The window is now resizable.
*New: System Configuration: The window is now resizable.
*New: Tablet Mode: New Tablet Mode emulating single window application is available in the main window, View menu. Suitable for touchscreen displays and small screens with high resolution.
#Fixed Bug: Control: Advion CMS crash during Manual Tune.
#Fixed Bug: Control: Agilent ICF - OK button was not displayed in the configuration dialogue for some combinations of display resolution and text scaling.
#Fixed Bug: Control: Antec Decade II was not giving signal data when configured in Clarity 8.4.0.
#Fixed Bug: Control: EST AS 120/Cobra Injection target parameter in method was ignored, first injector was used regardless of method settings.
#Fixed Bug: Control: Microsaic MS detector - wrong sample rate in SIM and Interleave acquisition mode.
#Fixed Bug: Control: Shimadzu AOC-20 occasional communication error occurred.
#Fixed Bug: Calibration: Point to Point curve fit gave N/A results.
#Fixed Bug: Extension SST: When Named Groups used for evaluation, some parameters were enabled even when not available. Now they are limited to Amount and Amount% only.
#Fixed Bug: GPC Calibration - wrong number of signals (one less) set from standard chromatogram.
#Fixed Bug: Chromatogram: Audit Trail after Save As of a chromatogram did not contain entries from the original chromatogram.
#Fixed Bug: Import/export: Import and export of AIA (*.cdf) files did not retain Y axis range.
#Fixed Bug: Method Setup, Calculation: a link to a calibration outside the Calib subfolder of the current subdirectory could not be set (introduced in 8.4.0).
#Fixed Bug: Possible crash when incorrect version of mfc140u.dll (14.0.24210.0) from the year 2016 was installed.
#Fixed Bug: Possible freeze during export of chromatogram to AIA format from Chromatogram window.
#Fixed Bug: Print Audit Trail: Full text was not displayed when a cell was not big enough to fit the text (ellipsis instead of a word wrap were wrongly used).
#Fixed Bug: Sequence: Edit - Setup Columns... command was disabled to view or edit during a run.
#Fixed Bug: Summary Table User Columns: values based on common variables were not printed for not identified compounds.
#Fixed Bug: Template sequence and calibration not functional in other languages except English (localized name was expected).