Validator is a precise analog signal generator device.
Validator can either be connected directly to the DataApex A/D board 37-pin connector through the extension cable or through the terminal board to any other data acquisition device. Four sets of chromatogram data are stored in Validator.
Data are stored in the FLASH EEPROM memory in digital form and are converted to analog data using a 1-bit D/A pulse width modulator. This converter guarantees full monotonicity, good linearity and no missing datapoints. The signal resolution is 20bit.
Validator is available as a part of Validation kit only. Please see the Validation Kit page.
|Signal Accuracy||+/- 1 mV at 10 V Range|
|Signal Resolution||+/- 10 uV at 10 V Range|
|Signal linearity||-/+ 0,0015%|
|Time Accuracy||0,01% (stabilized state)|