Search

Control module for a variety of SSI pumps The UNI Ruby Control Module with the SSI Next Generation pumps profile allows for the direct control of a variety of SSI pump models (see table below). The control module enables direct control of the instrument over serial line. Direct control means...

Control module for a variety of SSI pumps The UNI Ruby Control Module with the SSI (LabAlliance) pumps profile allows for the direct control of a variety of SSI pump models (see table below). The control module enables direct control of the instrument over serial line. Direct control means that...

Control module for the SSI Pumps Series I, II, III and Pumps 1500, 150, Q-Grad The SSI Pumps driver allows a direct control of the SSI Pumps Series I, II, III and Pumps 1500, 150, Q-Grad. Clarity LC Control module enables the direct gradient control. The high-pressure gradient is created from...

The SST extension serves to monitor the correct function of the chromatography system. The program compares up to 12 selected parameters (e.g., retention time, efficiency, asymmetry of peaks) calculated according to one of three pre-selected methods (USP, EP, JP). These calculated values are either compared to the user's set limit...

For users who might need to often change the configuration of their instrument connections, DataApex offers the SV8 terminal board. Improved SV9 is currently available. The connection between the Clarity Chromatography Station's A/D converters and the instruments is usually made using a cable that is supplied with the station. However, as...

A device with screw contacts and LED status indication. The connection between the Clarity Chromatography Station's A/D converters and the instruments is usually made using the standard INT7 compatible cable supplied with the station. The leads in the cable are soldered to a D-SUB 37 pin (CANNON) connector. Any change...

Control module for the Sykam S2100 low-pressure gradient pump The Sykam S2100 Control module allows for direct control of the Sykam S2100 low-pressure gradient pump for 4 eluents. The user can easily create a gradient method from the LC Control window, set a percentage of each gradient component and an...

Control module for the Sykam S3210 and Sykam S3240 UV/VIS detectors The Sykam S3210/S3240 Control module allows for direct control of the Sykam S3210 and Sykam S3240 UV/VIS detectors. While the detector is not switched to the DAD MODE, the control module allows the digital acquisition on one (S3210) or...

The control module for the Sykam S5200 autosampler The Sykam S5200 Control module enables direct control of the Sykam S5200 autosampler over serial line. Direct control means that the autosampler can be completely controlled from the Clarity environment. Instrument method controlling the sample preparation conditions will be saved in the...

Control module for the Techlab K-7 thermostat The UNI Ruby Control Module with the Techlab K-7 profile allows for the direct control of the Techlab K-7 thermostat. The control module enables direct control of the instrument over serial line. Direct control means that the thermostat can be completely controlled from...

Control module for the Teledyne ISCO Foxy 200, Foxy Jr., Foxy R1 and Foxy R2 fraction collectors The UNI Ruby Control Module with the Teledyne ISCO fraction collector profiles allow for the direct control of the Teledyne ISCO Foxy 200, Foxy Jr., Foxy R1 and Foxy R2 fraction collectors. The...

Since 1991 DataApex develops and manufactures chromatography data stations. The chromatography station consists of genuine hardware & software developed by DataApex and continually tested in selected laboratories.   Show on Google Maps DataApex, a privately held company established in 1991, is a developer and manufacturer of chromatography software. The company is based...

DataApex Universal LC Control Module The DataApex Universal LC Control Module (LC UNI) is designed to function with LC Pumps controlled by text commands using the COM port (RS232). The pump must be able to change flow upon external command. It is not possible to use this module to control...

U-PAD is an external 24-bit A/D converter for the USB. The U-PAD is a predecessor of the U-PAD2 A/D converter. Discontinued from sale as of 2007. U-PAD is an external measuring unit for the CSW32 and Clarity stations designed for acquiring data from any chromatograph. U-PAD uses a USB communication channel and...

U-PAD is an external 24-bit A/D converter for the USB. The U-PAD2 is a predecessor of the Colibrick A/D converter. Discontinued from sale as of January 2013 . Discontinued from sale as of January 2013. U-PAD2 is an external 24-bit A/D converter that measures the voltages of chromatographic and electrochemical detectors. Integration frequency...

Control module for the Upchurch V-2500 series valves The Upchurch Valves Control Module enables direct control of the Upchurch V-2500 series valves over serial line. Direct control means that the valves can be completely controlled from the Clarity environment. Instrument method controlling the analysis conditions will be saved in the...

It is always possible to upgrade from Clarity Lite or any outdated DataApex software. As you upgrade to our latest Clarity product line, regular updates are available for free. Upgrades to Clarity (Lite, Offline) Clarity upgrades offer a solution for migration between various software versions produced by DataApex, including any obsolete...

The Validation Kit performs the Operational Qualification The Validation Kit (p/n CVK) is designed to perform the Operational Qualification of the Clarity Chromatography stations that acquire data using the A/D converters internal PCI cards INT7, INT9 or external USB boxes Colibrick, U-PAD, U-PAD2. An optional SST Extension is necessary for data...

The Clarity Validation Kit is designed to perform the Operational Qualification of the Clarity Chromatography Station Requirements The Clarity Validation Kit is designed to perform the Operational Qualification of the Clarity Chromatography Station (version 2.8 or higher) with INT7, INT9, U-PAD, U-PAD2 or Net-PAD A/D converters. An optional Clarity SST Extension...

The whole validation procedure is designed as a Validation Project that contains dedicated sequence, methods, SST methods and report styles. The OQ Validation Wizard will automatically open the prearranged sequence and all the methods needed, set all the parameters, launch measurement, save and print the results. OQ Validation Wizard   Validation Sequence User can...

Validator is a precise analog signal generator device. Validator can either be connected directly to the DataApex A/D board 37-pin connector through the extension cable or through the terminal board to any other data acquisition device. Four sets of chromatogram data are stored in Validator. Data are stored in the FLASH...

The VICI Valco FTP Control Module enables direct control of the VICI Valco FTP The VICI Valco FTP Control Module enables direct control of the VICI Valco FTP, a highly-configurable temperature controller with up to four channels that can be programmed to ramp independently or simultaneously. Direct control means that...

Control module for the VICI Valco valves The Valco Valves Control Module enables direct control of the VICI Valco valves mounted on two-position microelectric actuator, multiposition microelectric actuator or universal actuator over serial line. Direct control means that the valves can be completely controlled from the Clarity environment. Instrument method...

Video Tutorials Explore Clarity with our short, focused video tutorials. Each video highlights key features and guides you through various aspects of using the software effectively. Watch the tutorials on our YouTube channel or download them from our web...

Control module for the Watrex CTC 100 thermostat The UNI Ruby Control Module with the Watrex CTC 100 profile allows for the direct control of the Watrex CTC 100 thermostat. The control module enables direct control of the instrument over serial line. Direct control means that the thermostat can be...

We are cooperating with our users on various solutions based on Clarity Chromatography software. Please find below application notes and...

Control module for the HPLC system YL9100 The YL Instruments YL9100 HPLC Control module allows for direct control of the HPLC system over LAN interface, particular components use different communication interfaces (USB for FLD detector, RS232 for ELSD detector, RI detector and autosampler). The system may include pumps, detectors, column...

Control module for the YL6500 chromatograph The YL6500 GC driver developed by YL Instruments company can control YL6500 chromatograph over the LAN connection. Direct control means that the chromatograph can be completely controlled from the Clarity environment. Instrument method controlling the analysis conditions will be saved in the measured chromatograms. To...

Control module for YL6900 GC-MS detector The YL Instruments YL6900 Control module allows for direct control of the YL6900 GC-MS detector. The control is performed via LAN. The control module allows the digital acquisition of the detector signal in scan and SIM modes. The user can easily create the MS detector...

Zebrick is D/A and D/f converter for controlling LC pumps. Zebrick is designed for controlling LC pumps that can be driven by frequency or voltage using Clarity chromatography software. Zebrick operates with up to 4 D/A converters, 4 D/f converters and 8 auxiliary logical inputs and outputs. LC pump control is...