Search
Displaying 2101 - 2150 of 3173
GUIDES & DOCUMENTATION
- The GCxGC Chromatogram window is accessible from the Instrument window using the Window - Chromatogram command or the GCxGC Chromatogram icon. GCxGC Chromatogram window This window is divided…
- After installation, new functions of the GCxGC Extension will be available. Only features changed or added to the Clarity standard mode are listed and described here.
- The Instrument window on the GCxGC Instrument resembles a standard Instrument window in all functions save for the icons for Chromatogram and Calibration window, which are replaced by icons for…
- The Clarity GCxGC Extension is an optional part of the Clarity Chromatography Station (from version 6.0). It is intended for data acquisition and evaluation of data measured in the GCxGC Setup -…
- The GCxGC Extension is an optional, fully integrated part of Clarity software. It can be ordered as a part of new datastation or as an Extension to existing datastation (p/n A36).
- Tabs: General - Graph - Axes Appearance - Signals & Curves - Gradient & Auxiliary Signals - Directories User Options - General Show windows on the taskbar All open windows can be…
- Clarity with the EA Extension can control selected models of balance. The particular Balance Control Module must be configured to the corresponding Instrument in the System Configuration dialog. To…
- Clarity Chromatography Station is an effective tool for the acquisition, processing, and evaluation of data from a wide range of directly controlled chromatographs, and from any gas or liquid…
- GLP Options In this dialog, the GLP (Good Laboratory Practice) options for the entireClarity software can be configured. After prompting the System - GLP Options… command, the user is asked to log…
- Some of these requirements are mandatory in order to comply with the GLP, others are required only when some special features in Clarity or special conditions in the company should be satisfied. The…
- GPC Calculation The Method Setup - GPC Calculation dialog is analogical to the Method Setup - Calculation dialog. The Parameters and Report in Result Table sections are disabled in GPC Calculation…
- GPC Calibration Audit Trail As the GPC Calibration window is not the same as the normal Calibration window, the events that should be saved into the audit trail log might also differ. On the Clarity…
- GPC Calibration Options When creating a new calibration, the GPC Calibration Options dialog enabling to set the new Calibration Type will be displayed first. Caution: Be aware that the Calibration…
- GPC Calibration window The GPC Calibration window (opened by clicking the icon which replaces the icon when in the GPC mode) is used for creating, modifying and displaying calibration curves.…
- After installation, new functions of the GPC Extension will be available. Only features changed or added to the Clarity standard mode are listed and described here.
- The Clarity GPC is an optional Extension for the Clarity Chromatography Station (from version 2.3). The Clarity Chromatography Station can acquire data from any GPC system with standard analog…
- The Method Setup - GPC Integration dialog is similar to the Method Setup - Integration dialog, apart from these three differences: The Solvent Peak operation excludes selected integrated peaks from…
- GPC Integration In the Integration Table on the GPC Integration tab all operations used for the GPC peak integration are displayed and editable. The operations can be entered directly into the table…
- GPC Ranges tab serves for the calculation of peak area percentage for defined ranges of molecular weights or average molecular weight for selected area percentage ranges. The type of the ranges (…
- This tab presents the same parameters as on the Method Setup - GPC Ranges tab along with the computed results. For MW mode, Result Percent field is calculated, while for Percent mode, Result MW is…
- GPC Results The results for the active chromatogram (signal) can be found in the Result Table on the GPC Results tab. On the right side of the tab the used calibration file and Mark-Houwink…
- GPC Slice Table The GPC Slice Table tab displays the Cumulative Molecular Weight Distribution Table for the active peak. In signals with multiple evaluated peaks, the peak is set active by clicking…
- Using the GPC Summary tab, a Summary Result Table for all displayed signals is accessible. Its appearance can be customized using the Setup Columns... and Summary Options... commands from the local…
- Gradient & Auxiliary Signals tab Tabs: General - Graph - Axes Appearance - Signals & Curves - Gradient & Auxiliary Signals - Directories User Options - Auxiliary Signals This tab…
- Invoke the Options... button in the Method Setup - LC Gradient dialog to open the Gradient Options dialog. This dialog allows to set the custom name for particular solvents, to switch whether they…
- Graph Properties The Graph Properties dialog for the Calibration Curve Graph allows customization of the graph's appearance and display settings. Graph Properties Use User Options Applies global…
- Graph Properties - Auxiliary Signal Details tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra This tab…
- Graph Properties - Axes Appearance tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Sets appearance…
- The GPC Options tab of the Graph Properties dialog is used to customize the appearance of the curves displayed on the Chromatogram tab of the Chromatogram window. Graph Properties - GPC Options…
- Graph Properties - Gradient & Auxiliary Signals tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra…
- Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Except for the Use User Options and Show Data Points…
- Graph Properties - MS Spectra tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Allows to set the…
- Graph Properties - MS Spectra tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Allows to set the…
- Graph Properties - Signal Axis tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Sets display scale…
- Graph Properties - Signals tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Graph Properties -…
- Graph Properties - Time Axis tab Tabs: Graph - Axes Appearance - Time Axis - Signal Axis - Signals - Gradient & Auxiliary Signals - Auxiliary Signal Details - MS Spectra Sets the display scale…
- Graph tab Tabs: General - Graph - Axes Appearance - Signals & Curves - Gradient & Auxiliary Signals - Directories Sets the appearance of the graphs. This selection applies to all graphs when…
- You can find documentation for each of DataApex hardware, such as Colibrick, Zebrick, U-PAD2, Int9 or MultiCOM, in the following locations: Downloads at our website: Latest versions of PDF …
- Basic Hardware and Software Compatibility: Latest information about hardware and software compatibility can be found in the datasheet D016 or on the web page www.dataapex.com under section Products…
- Hardware Installation The following chapters describe the installation of the HW key and a brief installation of the Colibrick A/D converter (not included in case of direct control of the…
- Help This is an entry point to a submenu of commands that displays fundamental information about the Clarity chromatographic station. An analogous menu is available in all basic station windows…
- Help This command invokes Help for the window you are currently using. In this case, it opens Help for Instrument window.
- Help Displays the help item concerning the Device Monitor window.
- This chapter describes how to calculate Peak to Valley, which is a ratio of signal height in peak apex and signal height in the end of peak. This ratio is used for e.g., impurity determination.…
- This chapter describes how to calculate Relative Retention Time (RRT). In Clarity, there are basically two ways how to achieve that. In the first one, there is peak in the chromatogram that you want…
- Sometimes if you encounter problems while working with Clarity, you may be asked by our Support team to provide a dump (*.dmp) file created from the problematic Clarity process. Specifically, this…
- To control the configured LC pumps directly from Clarity, the Device Monitor contains the LC Monitor ⓐ section common to up to four pumps (i.e., a maximum of four solvents). Any combination of…
- Clarity does not store any results in the chromatogram, the result table is always calculated from the actual state of the calibration file referenced in the Calibration Table (Peak Table), i.e.…
- To open PDA window navigate to Window - PDA Window ① in the Chromatogram window alternatively click the PDA Window icon ②. Spectra are automatically displayed in the PDA Chromatogram window…
- Displaying peak purity is one of the fundamental tasks when ensuring that no co-eluting or co-migrating impurities contribute to the peak's response. Used views: Chromatogram View, Peak Purity…